Refine Your Search

Date

Date

Topic

Topic

Author

Author

Tools and equipment Standard Engines

Search Results

Viewing 41 to 60 of 9039
<< First< Previous12345Next >Last >>
Sort by title
Standard

Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, Cold Forming, Welding, and Brazing
2020-06-05
CURRENT
J2435_202006
This SAE Standard covers normalized electric resistance welded flash controlled single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the inside diameter (ID) weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and purchaser. The grade of material produced to this specification is higher in carbon and manganese content than the grade of material specified in SAE J356 and is intended to service higher pressure applications than equivalent sizes of SAE J356.
Standard

Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
2002-10-25
HISTORICAL
J2613_200210
This SAE Standard covers sub-critically annealed electric resistance welded flash controlled single-wall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead. The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications than like sizes of the grades of material specified in SAE J356 and SAE J2435. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J356 and SAE J2435. Nominal reference working pressures for this tubing are listed in SAE J1065.
Standard

Weather
2016-11-12
HISTORICAL
AS6286/4
This document shall be used in conjunction with: - AS6286, Training and Qualification Program for Deicing/Anti-icing of Aircraft on the Ground - AS6286/1, Processes including Methods - AS6286/2, Equipment - AS6286/3, Fluids - AS6286/5, Health, Safety and First Aid - AS6286/6, Aircraft Deicing/Anti-icing Diagrams, No-Spray-Zones
Standard

Water Content Instrumentation for Icing Cloud Characterization
2023-05-22
CURRENT
AIR6977
This SAE Aerospace Information Report (AIR) provides a comprehensive overview of primary water content measurement instrumentation, for both facility-based icing research and in-flight icing research, over the range of commonly used aircraft certification icing envelopes. It includes information on the theory of operation of the instruments, system errors and limitations, and practical considerations when using them for cloud characterization. This document does not address other icing cloud measurements of interest, such as particle sizing, or measurement of phenomena such as snow, sleet, or hail.
Standard

Waste Heat Recovery System Thermal Management
2020-02-24
CURRENT
J3173_202002
Waste heat recovery (WHR) systems are used in vehicles and machines powered by internal combustion (IC) engines to capture unused/waste heat and utilize it thereby reducing fuel consumption and emissions by improving efficiency. This information report is a survey of the waste heat recovery methods that include the use of heat exchangers.
Standard

WROUGHT NICKEL AND NICKEL-RELATED ALLOYS
1976-07-01
HISTORICAL
J470_197607
This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called "superalloys," or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.
Standard

WROUGHT NICKEL AND NICKEL-RELATED ALLOYS
1976-07-01
HISTORICAL
J470C_197607
This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called "superalloys," or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.
Standard

WROUGHT COPPER AND COPPER ALLOYS
1976-06-01
HISTORICAL
J463D_197606
This standard* describes the chemical, mechanical, and dimensional requirements for a wide range of wrought copper and copper alloys used in the automotive and related industries.
Standard

WRENCHES, HAND TWELVE POINT HIGH STRENGTH, THIN WALL
1988-02-01
HISTORICAL
AS954D
This SAE Aerospace Standard (AS) covers high strength thin wall commercial sockets, flexible sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS 870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points.
Standard

WIRING, AEROSPACE VEHICLE
1998-04-01
HISTORICAL
AS4897A
This specification covers all aspects from the selection through installation of wiring and wiring devices used in aerospace vehicles. Aerospace vehicles include airplanes, helicopters, lighter-than-air vehicles, and missiles.
Standard

WIRING, AEROSPACE VEHICLE
1998-04-01
HISTORICAL
AS50881
This specification covers all aspects from the selection through installation of wiring and wiring devices used in aerospace vehicles. Aerospace vehicles include airplanes, helicopters, lighter-than-air vehicles, and missiles.
<< First< Previous12345Next >Last >>
X